Tiny Tot Installation Photos

Below are photos of tht Tiny Tot installation.

I had to cut a six inch dia. hole for the Navigator built
bronze thru hull for the pipe. Shown is the cloverleaf
pipe cap.

Here is a closer look at the well made bronze thru hull.

I placed it on the forward sette, so I made it easily removeable.  The long
pipe provides great radiant heat and nice draft.

Close up of the Tiny Tot.  I will bolt it to the tile and hinge the two tile pieces
so I can fold them together for storage.

I used a stainless steel band off of a fernco coupling to attach the pipe to the thru hull.
I can loosen it and slide it down over the pipe to remove the stove easily. I also used
two 45 degree pipe fittings in order to accomodate the angled roof.  One is used to below
the roof and one above the roof, keeping everything nice a plumb.  This allowed me to
mount the bronze thru hull  flush with the roof without having to build a wooden block
to mount it on.  This way it is less obtrusive when the pipe is put away and eliminate another
possible leak source.